User manual

D-10 Event Message
s
"CIP: The modem group %s already exists /n"
Meaning: The administrator tried to configure a modem
group, but the modem group already exists
Action: Choose another modem group name
User Manager Messages
"AUTH: Unable to authenticate if both authentication IP's are set
to 0"
Meaning: The user may not be defined locally, remote
authentication is not enabled, or a remote
authentication IP address is not configured
Action: Define the user locally or configure a RADIUS
server IP address
"AUTH: Unable to account if both accounting ip's are set to 0"
Meaning: Remote accounting is enabled, but no RADIUS
accounting server IP addresses have been
configured
Action: Either disable remote accounting or configure a
RADIUS accounting server IP address
"AUTH - Most likely client/server configuration mismatch"
Meaning: The RADIUS secret configured on the NETServer
does not match the secret configured on the
RADIUS server, or an invalid RADIUS server is
trying to contact the NETServer
Action: Ensure the secret is identical on the NETServer
and RADIUS server
Filter Manager Process Messages
"FM: In filter file <name> had no rules for <protocol> protocol"
Meaning: A filter protocol section is defined, but there are
no rules associated with it.