User manual

D-6 Event Message
s
"ip_addr_pool_init: bad address pool range (%lx), the value must be between
1 and 254. \n"
Meaning: The administrator tried to specify the size of the
IP address pool using a value that is either too big
(greater than 254) or too small
Action: Specify a pool size that is within this range using
the set ip system pool_members command
"ip_send_common: on demand route, X, input queue overflow. One packet
dropped\n"
Meaning: When a call to an on-demand address is being
established, IP datagrams for that address are
queued. If the queue fills up before a call can be
completely established, subsequent datagrams are
dropped
Action: This message is informational. No action is
required
"ip_fwd_get_opt: duplicate ip address %lx\n"
Meaning: A dial-in user tried to use an address already
allocated for another dial-in user
Action: Re-configure the dial-in user to use a different
remote IP address
"ipCfmSet_ipRoute: gateway of destination X, mask Y is not reachable. static
route not added\n"
Meaning: The administrator tried to define a static route
using a gateway that is not reachable via any of
the existing IP routes
Action: Specify a different gateway that has an IP address
that can be reached