User manual

LEDs and DIP Switches C-1
Appendix C
LEDs and DIP Switches
LED Overview
There are two rows of LEDs on the NETServer/8, three rows of
LEDs on the NETServer 16.
• In the 8-port NETServer, the top row of LEDs contains the
status indicators for all eight V.34 or I-modems.
• In the 16-port NETServer, the top two rows are indicators
for the modems.
• The bottom row of LEDs on all units contains indicators for
the NETServer control circuitry and network interface.
Figure 1 below displays LEDs on NETServer Plus/16. Note that
in the 8-port version the middle row is not present.
TM
NETServer/16 V.34
16
RUN/
FAIL
1
2345
67
8
RUN/
FAIL
9
10
11
12
13 14
15
RUN/
FAIL
FLASH
ROM
LAN
TX
LAN
RX
LAN
STATUS
MGT
Figure 1. NETServer 8/16 Plus LEDs