User manual

Notices & Technical Specifications A-13
Fax Standards
A Total Control MP modem provides Group III-compatibility when
combined with Class 1 or Class 2.0 fax software. In addition, the
modem adheres to the following standards.
TIA/EIA-578 Service Class 1 Asynchronous
Facsimile DCE Control Standard
TIA/EIA-592 Service Class 2.0 Asynchronous
Facsimile DCE Control Standard
ITU-T V.17 14.4K/12K bps
ITU-T V.29 9600/7200 bps
ITU-T V.27 ter 4800/2400 bps
ITU-T V.21 300 bps
Serial Port Rates
115.2K, 57.6K, 38.4K, 19.2K, 9600, 4800, 2400, 1200, 300 bps
Phone Line Interface
RJ11
Communications Channel
Full/half duplex on 2-wire dial-up, dedicated, or leased phone
lines; demand-driven high speed channel turnaround in HST
mode; symmetrical speeds in V.32 bis mode
Operational Modes
Asynchronous, Auto Dial/Answer, Manual Originate/Answer,
Smart/Dumb mode, Auto Dial/Auto Answer, Auto Answer
only, Forced Originate (MI/MIC)
Fax Modems
(The above modes plus fax mode Dialing)
Dialing Rotary (pulse 0-9), Tone (DTMF 0-9, #, *), a-z when in
Quote (") Mode