User manual

Administrative Tools 9-2

Note: The SDL batch file will use the Com 1 port on your PC to

download to the FLASH file system. This default can be

modified to Com 2 by changing the first x value. You may also

change the baud rate from the default of 38400 bps.

pcsdl -p

-r%BAUDERATE% -vSD”SDL version” -vNA”Image

version” -nSDtr -nNApn

For example:

pcsdl -p2 -r38400 -vNA9.9.9 -vNA 4.0.0 -nSDtr -nNApn

If your settings are correct, type:

sdl.bat

When the application begins loading, power on your

NETServer.

Wait a few moments for the download to complete.

NETServer is now ready for configuration.

Return DIP Switch 4 to the OFF position.

You will see the text below scroll down your screen, followed by

a prompt from NETServer to start the CLI Quick Setup program.

For instructions on the Quick Setup program, see Chapter 2: Basic

Installation and Setup.

Important: If you prefer, you can exit from Quick Setup after

initialization and continue with the Windows-based NETServer

Manager Plus program to configure your unit.

NETServer 8/16 Application Loader Is Running...

Initializing the FLASH file system.

Erasing FLASH configuration.

Uncompressing file: ns816.bin.z

Initializing decompression module.

In : 2019853 bytes

--10--20--30--40--50--60--70--80--90--100

Completed uncompressing the image. NETServer 8/16 kernel is

running...