User manual

Administrative Tools 9-1
7
Show I-modem parameters
The show imodem interface and set imodem interface
commands display modem configuration information for the
modem specified. To view I-modem switch settings, type:
show imodem interface mod:1 settings
Note: You can display the same information by invoking the set
imodem interface command as follows:
set imodem interface mod:1 at_command ati12
The result:
USRobotics Total Control MP I-modem with ISDN Switch Settings...
Switch Protocol *W 2 US National ISDN-1
Multipoint *M 1 Multipoint
Dialing Mode *O 1 Overlap Sending mode
SPID *S1 0555100001 <-SPID1
*S2 0555300001 <-SPID2
Directory No. *P1 5551000 <-DN1
*P2 5553000 <-DN2
TEI *T1 00 Automatic TEI
*T2 00 Automatic TEI
Physical Interface: Active
Data Link Layer: Active
OK
The set imodem interface command lets you choose the AT
command of your choice. Type, for example:
set imodem interface mod:1 at_command ati4
The result:
USRobotics Total Control MP I-modem with ISDN/V.34 Settings...
B0 C1 E1 F1 Q0 V1 X7
BAUD=115200 PARITY=N WORDLEN=8
DIAL=PULSE ON HOOK TIMER
&A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1 &L0 &M4 &N0
&P0 &R2 &S0 &T4 &X0 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=090
S08=002 S09=006 S10=014 S11=070 S12=255 S13=000 S14=001 S15=000
S16=000 S17=000 S18=000 S19=000 S20=000 S21=010 S22=017 S23=019
S24=150 S25=000 S26=001 S27=000 S28=008 S29=020 S30=000 S31=000