User manual

9-16 Administrative Tool
s
Show Commands
You can use show commands to view the NETServer’s current
configuration and its routing activity. A few of the show
commands used for troubleshooting are covered in this section,
including show memory, show connection settings, show
connection counters and show accounting information. For a
full explanation, see the CLI Reference Guide.
Show Memory
The show memory command displays the NETServer’s DRAM
memory utilization.
For example:
Total System Memory Resources: 2500 KB
Free Memory: 2012 KB
Code Size: 0 KB
Initialized Data Size: 0 KB
Uninitialized Data Size: 0 KB
Stack Size: 0 KB
Show Connection Settings, Counters
The show connection command summarizes settings and the
number of incoming calls for dial-in connections. You can reset
default settings with the set connection command.
show connection
[settings] [counters]
For example:
CONNECTION SETTINGS
Host Selection Method: ROUND-ROBIN
Global User Name: USR_NETS
Service Prompt: Login/Network User:
Message Prompt: manage:
Host Selection Method Means of choosing a host. Choices are
round-robin or random.
Global User Name USR_NETS is the default
Command Prompt Displayed when user dials in
Service Prompt Displays when dial-in user is linked
Message Prompt Prompts user for login/network
service