User manual

Administrative Tools 9-1
5
They are list switched interfaces, list interfaces and show
interface settings, show switched interface.
Viewing Netserver Plus System Information
You can use the show system command to see what version of
NETServer code your NETServer Plus is using. U.S.Robotics
Technical Support may require you to furnish this information.
The NETServer replies with the firmware revision number, the
date and time that this revision was compiled. For example:
SYSTEM DESCRIPTION
System Descriptor:
U.S. Robotics NetServer/8 X4.0.0, Built on Dec 19 1996 at 06:59:26.
Object ID: ( 1.3.6.1.4.1.428.3.10 )
System UpTime: 0d 02:47:54
System Contact: larryc
System Name: lanserve
System Location: westboro
System Services: Internet EndToEnd Applications
System Transmit Authentication Name: Netserver
System Version: X4.0.0
Displaying System Information
List Commands
You can use list commands to view current configurations for
all values stored in tables as well as facilities (NETServer
processes), files (FLASH memory configuration) and other data.
These commands are fully detailed in the CLI Reference Guide.
List Critical Events
The list critical events command displays the last ten critical
status events, and the system time when each occurred. You can
change which events are logged as critical, using the set facility
command, which is useful for troubleshooting and debugging.