User manual

Administrative Tools 9-

CONFIGURED NETWORK SERVICES

Server Admin

Name Type Socket Close Status

tftpd TFTPD 69 FALSE ENABLED

DATA:

dialout DialOut 32773 FALSE DISABLED

DATA: auth=off, login_banner= “Welcome to My Net”, login_prompt=“My

Session,drop_on_hangup=on

telnetd TELNETD 23 FALSE ENABLED

DATA:

TELNET server TELNETD 99 FALSE DISABLED

DATA:”

socket

Sets the port number the NETServer listens on for network

service requests.

server_type

Type of service being offered (cleartcpd, dialout, httpd, snmpd,

telnetd, tftpd).

Enabling and Disabling Network Service

By default, the network service is disabled when you add it. To

enable the service:

disable network service

<service_name>

To disable network service:

disable network service

<service_name>

Deleting a Network Service

To delete a network service:

delete network service

<service_name>

Using TFTP

TFTP (Trivial File Transfer Protocol) can be used to transfer files

to and from the NETServer Plus. Since this network service is

enabled by default, set it up by first configuring your PC as a

TFTP client of the NETServer by entering this command:

add TFTP client