User manual

9-8 Administrative Tool

service_name

A name you assign to the service being added or edited. Limit of

32 characters.

close_active_connections

Indicates whether or not to close any active connections when a

service is disabled.

enabled

When you add a network service, it is disabled by default. You

can include this parameter while adding the network service to

enable it. Be sure to add the enable value after any data value.

For example (abbr.):

add network serv tel server_t telnetd data auth=off ena yes

data

Ancillary data. Format one or more values with the following

syntax. Defaults are indicated.

auth=on/off On

indicates that login/ password

authentication should be performed

on incoming connections. Default: on

login_banner=string

ASCII string sent to a client when

the connection is made. It must be

quoted. Default: none

login_prompt=string

ASCII string specifying the login

prompt to be sent during

authentication. It must be quoted

and auth must be on. Default: login.

service_type=manage/

dialout

Default: manage

modem_group=string Default: none

drop_on_hangup=on/off Default: off

Using the list services command after typing the example on

page 9-8 will display something like the table on the next page.