User manual

9-6 Administrative Tool
s
Communicating with Remote and Local Sites
Dial and Connect Commands
You can dialup a remote or local user with the dial and connect
commands and log in to hosts with the rlogin and telnet
commands. You can use the hangup and logout commands to
clear those lines.
Dial Command
The dial command makes an immediate connection for a
manual dial-out user using the dial-out information in the user's
profile. Use the following command:
dial
<user_name>
Note: The user name must already exist in the system.
Hangup Command
To close a connection at the conclusion of a call, use the
following command:
hangup user
<user_name
>
To close an interface use the following command:
hangup interface
<interface_name>
To close a modem group, use the following command:
hangup interface
<modem_group>
Reboot Command
Use the reboot command to recycle the system. But first, be sure
to use the save all command to preserve any configuration
changes.