User manual

Administrative Tools 9-
3
Customizing NETServer Plus Parameters
Setting the System
With the set system command you can designate a name and
location for your LANLinker as well as related contact
information and a keyword necessary to make a PPP connection
to a remote router over the WAN. Use this command:
set system
name
[name]
location
[location]
contact
[contact information]
transmit_authentication_name
[keyword]
For example:
set sys na “white house” loc DC cont “staff, ext 555” tran “FOB”
Running Script Files
The do command is a very powerful tool to configure multiple
users, protocols or other functionality by running a script file
containing CLI commands. Create a file with an editor, use
TFTP to transfer the file to the FLASH file system, and issue the
do command to run the script file.
Issuing AT commands for I-modems
The set imodem interface command lets you change switch
protocol, dialing mode, SPID, directory number and TEI values
by invoking the at_command parameter.
To use the at_command parameter, specify a string starting with
AT*, followed by the setting code and number (if any), an equals
sign and the new value, all enclosed in quotations.
For example, to change the interface 4 SPID, type (abbr.):
set imod int mod:4 at_com “at*s2=55512341230111”
See the tables on the next page for code designations and setting
options.
Note: European customers may disregard SPID information.