User manual

Administrative Tools 9-1
Chapter 9
Administrative Tools
This chapter covers administrative commands that are used for:
• Reconfiguring your system
• Communicating with a remote or local site
• Troubleshooting
• Displaying system information
• Performing a software download
Reconfiguring Your System
The commands detailed in this section control configurable
aspects of your system.
Customizing CLI Parameters
Command Prompt
Use set command if you have more than one NETServer Plus
and want to differentiate between them or you just want to
customize your prompt from the default - NETServer>. The
prompt can be up to 64 characters. Use the following command:
set command prompt
<“prompt message”>
For example:
set command prompt Welcome!