User manual

LAN-to-LAN Routing 7-1

Assumptions

This case study assumes the following:

• NETServer A's sysname is netserv_a

• NETServer B's sysname is netserv_b

• NETServer A is on LAN1, the main data center of the

company

• NETServer B is on LAN2, a branch office

• NETServer A will establish an on-demand connection to

NETServer B

• If traffic on the connection becomes too great, NETServer A

will open a second line (this configuration will use the

default channel expansion value)

• If there is no traffic on the connection for 30 minutes,

NETServer A disconnects

Configuring NETServer A

Configuration of NETServer A is broken down into the

following sections:

• Configuring LAN Networks

• Adding a User

• Configuring Connection Parameters

• Setting PAP Authentication

• Saving the Configuration