User manual

LAN-to-LAN Routing 7-1
7
Step 9 - Configure PAP/CHAP Authentication Parameters
You can set PAP and CHAP-related authentication parameters
using the following commands:
set ppp receive_authentication
[chap | pap | either | none]
set system transmit_authentication_name
<name>
set network user
<name>
send_password
<password>
PAP or CHAP Authentication
By default, the NETServer is configured globally to use either
PAP or CHAP authentication for PPP connections. You can
change this setting using the following command:
set ppp receive_authentication
[chap | pap | either | none]
Send Password
Needed for a two-way LAN-to-LAN routing connection.
Indicates the password to be sent when logging into a remote
location.
set network user
<name>
send_password
<password>
Step 10 - Save Your Work
Use the following command:
save all