User manual

LAN-to-LAN Routing 7-1
Chapter 7
LAN-to-LAN Routing
The NETServer can perform IP, IPX, and AppleTalk LAN-to-
LAN routing with a remote NETServer or third party router
over analog or ISDN lines.
Note: This chapter assumes that the basic installation of all
involved routing devices has already been performed, and that
networks on the LAN (Ethernet) side of the NETServer have
been configured.
Figure 1 depicts a typical LAN-to-LAN routing scheme using
two NETServers.
NETServer A
NETServer 
PSTN/
ISDN
LAN A LAN 
Figure 1. LAN-to-LAN Topology