User manual

Network Dial-Out Access 6-1
7
7.
In the NCSI program group, click
P
ort Setup for NCSIPort
95
option to select a specific port on NETServer. Selecting a
General
name is not supported. When you select a
specific
name option, the screen displays as follows. Be sure to scroll
down to the NETServer port you specified in the earlier
configuration, otherwise NCSI may fail.This completes
installation of the NCSIPort for 95 driver. Click on
S
ave
.
Once you have configured NCSIPort 95, it will be available
for any communications applications every time.
Setting Up Security
If you are going to set up security, you must set it up after each
time you reboot your system. You can setup security for non-
terminal applications as follows:
1
Double click on the
Security
icon in the NCSI95 program
group.
2
Enter a
User Name
and
Password
. This data is used by
non-terminal applications when accessing NETServer.