User manual

6-16 Network Dial-Out Acces
s
4.
Remove the Installation Diskette, click on the
R
estart
option
to restart your computer and Windows 95.
Note: You must reboot Windows after the NCSI software
has been installed. Do this before setting up NCSIPort.
5.
Go to the NCSIPort for 95 Program Setup section below.
NPC’s NCSIPort for 95 Program Setup
NCSIPort for 95 is the 32-bit Windows application that
redirects communications calls to NCSI. This provides
support for:
• NCSI-compatible DOS applications
• 16-bit Windows applications that support NCSI
• Native 32-bit Windows 95 applications
To set up NCSIPort for 95, follow the steps below:
1.
Click on
Start
on your Taskbar, click on
S
ettings
, then click
on
C
ontrol Panel
. In the Control Panel window, click on
A
dd New Hardware
, then click
Next
.
2.
At the next screen, click on the
N
o
option. This instructs
Windows 95 that you do not want to search for new
hardware. Click
N
ext
again.
3.
Double-click on the
P
orts
option in the list provided. Then
click
N
ext
.
4.
Click on the
H
ave Disk
option found on the middle right-
hand side of the dialog box. Click the
B
rowse
option to
find the sub-directory where NCSI95 is installed, or simply
enter the directory name in the area provided. Next, click
the
OK
option.
5.
The next menu screen displays the NCSI Shared Port facility.
When you see this facility appear, click
N
ext
.
6.
Click on the
F
inish
option. The NCSI Port Driver will
appear as COM 4 on the Windows 95 operating system.