User manual

Network Dial-Out Access 6-11
NPC DOS Command Overview
The following table shows basic NPC DOS commands.
Command
Purpose
Syntax (how to use it)
NCSI.exe
This command loads the
DOS TSR. (Terminate and
Stay Resident) program.
At the ncsi:\> prompt,
type
ncsi
and press .
NCSI_REL.exe
This command removes
the DOS TSR from
memory.
At the ncsi:\> prompt,
type
ncsi_rel
and press
.
CLIST.exe
This utility is used to view
the NETServer and display
all available modems
(devices) in the
NETServer.
At the ncsi:\> prompt,
type
clist
and press .
NTERM.exe
This is the menu-driven
terminal emulator
program that enables you
to connect to and use the
modems in your
NETServer.
At the ncsi:\> prompt,
type
nterm
and press
.
BTTY.exe
This is the command line
terminal emulator
program that enables you
to connect to and use the
modems in your
NETServer.
A the ncsi\util\>
prompt, type
btty
and
press .
Pressing the <F10> key
exits this emulator
program.
TTYC.exe
This utility performs a
loopback test.
At the NCSI\UTIL\>
prompt, type TTYC and
press . Pressing the
<F1> key will display a
help screen for this
option.