User manual

5-16 Network Dial In Acces

Step 2 - Set the AppleTalk Range

Specify the range of addresses within your LAN network range

that you want to make available for the remote connection:

set network user

<name>

range_appletalk_address

<range>

Step 3 - Disable Zone Filtering (optional)

This setting determines the AppleTalk zones that the remote

user will see. By default, AppleTalk zone filtering is enabled,

which means that zone filtering occurs based on filter rules that

you defined in the filter file. Refer to Chapter 8, Packet Filters for

more information on creating and using filters.

You can disable zone filtering using the following command:

set network user

<name>

filter_zones disable

Step 4 - Save Your Work

Use the following command:

save all

Continue to the Configuring Additional Parameters on

page 5-18 for information on setting additional network user

parameters.