Installation guide

USR5441 Installation Guide

U.S. Robotics Wireless

MAX

g Range Extender

Installation

Package Contents:

Prepare for installation

You must be using a wireless router or access point that supports WDS (Wireless Distribution

System). If you are using WPA as an encryption method in your wireless network, you must be

using either TKIP or AES, not a combination, since the Range Extender only supports one or the

other.

You must have administrator rights on your computer in order to install this product.

Be sure to find out what letter your CD-ROM drive uses before you begin installing your new prod-

uct. You will need to know this to install your software.

Connecting the Wireless MAXg Range Extender

Note: For the most updated information, visit: http://www.usr.com/support/.

You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more

detailed information.

Step One: Connect the Wireless MAXg Range Extender

Note: Look at the label on the bottom of the Wireless MAXg Range Extender and write

down the LAN MAC address listed before you physically place the Range Extender. You will

need this for future reference.

A. Connect the antenna to the Wireless MAXg Range Extender.

USR5441 Wireless MAXg Range Extender 5VDC power supply

Quick Installation Guide Installation CD-ROM which includes User Guide

One (1) Ethernet cable Detachable antenna

Wireless MAXg Range Extender