Technical data
Table Of Contents
- Professional Access Point Administrator Guide
- Contents
- About This Document
- Getting Started
- Web User Interface
- Basic Settings
- Navigating to Basic Settings
- Review / Describe the Access Point
- Provide Administrator Password and Wireless Network Name
- Set Configuration Policy for New Access Points
- Update Basic Settings
- Summary of Settings
- Basic Settings for a Standalone Access Point
- Your Network at a Glance: Understanding Indicator Icons
- Cluster
- Status
- Advanced
- Basic Settings
- Command Line Interface
- Troubleshooting
- Regulatory Information
- U.S. Robotics Corporation Two (2) Year Limited Warranty
- Glossary
- Index
Professional Access Point
Administrator Guide
Interfaces - 78
This page displays the current Ethernet (Wired) Settings and Wireless Settings.
Ethernet (Wired) Settings
The Internal interface includes the Ethernet MAC Address, VLAN ID, IP Address, and Subnet Mask.
The Guest interface includes the MAC Address, VLAN ID, and Subnet.
If you want to change any of these settings, click the Configure link.
Wireless Settings
The Radio Interface settings include radio Mode and Channel. Also shown here are MAC addresses and
network names for internal and guest interfaces. (See “Wireless Settings” on page 97 and “Radio” on
page 129 for more information.)
If you want to change any of these settings, click the Configure link.