Technical data
Table Of Contents
- Professional Access Point Administrator Guide
- Contents
- About This Document
- Getting Started
- Web User Interface
- Basic Settings
- Navigating to Basic Settings
- Review / Describe the Access Point
- Provide Administrator Password and Wireless Network Name
- Set Configuration Policy for New Access Points
- Update Basic Settings
- Summary of Settings
- Basic Settings for a Standalone Access Point
- Your Network at a Glance: Understanding Indicator Icons
- Cluster
- Status
- Advanced
- Basic Settings
- Command Line Interface
- Troubleshooting
- Regulatory Information
- U.S. Robotics Corporation Two (2) Year Limited Warranty
- Glossary
- Index
Professional Access Point
Administrator Guide
Class and Field Reference - 277
rts-threshold
Purpose The size of frames at which RTS/CTS will be used.
Valid values 0-2347.
fragmentation-threshold
Purpose The size of frames at which they will be fragmented.
Valid values 256-2346.
load-balance-disassociation-utilization
Purpose The load that must be exceeded in order for a station to be disassociated. The condition for
load-balance-disassociation-stations must also be satisfied, if it is non-zero.
Valid values A non-zero percentage, or 0 to disable.
load-balance-disassociation-stations
Purpose The number of associated stations that must be exceeded for a station to be disassociated.
The condition for load-balance-disassociation-utilization must also be satisfied, if it is non-
zero.
Valid values 1-2007, or 0 to disable.
load-balance-no-association-utilization
Purpose The load that must be exceeded in order for new stations to be prohibited from associating.
Valid values A non-zero percentage, or 0 to disable.
ap-detection
Purpose Whether AP detection is performed. If on, the detected APs will be represented by instances
of the detected-ap class.
Valid values "on" or "off".
station-isolation
Purpose Whether stations are isolated. If on, then stations on this radio cannot exchange data with
other stations on this radio.
Valid values "on" or "off".
wme
Purpose Whether WME is enabled. Determines whether wme-queue values will be sent to clients.
Valid values "on" or "off".
wme_wifi_noack_test
Purpose Mode for Wi-Fi noack test.