Technical data
Table Of Contents
- Professional Access Point Administrator Guide
- Contents
- About This Document
- Getting Started
- Web User Interface
- Basic Settings
- Navigating to Basic Settings
- Review / Describe the Access Point
- Provide Administrator Password and Wireless Network Name
- Set Configuration Policy for New Access Points
- Update Basic Settings
- Summary of Settings
- Basic Settings for a Standalone Access Point
- Your Network at a Glance: Understanding Indicator Icons
- Cluster
- Status
- Advanced
- Basic Settings
- Command Line Interface
- Troubleshooting
- Regulatory Information
- U.S. Robotics Corporation Two (2) Year Limited Warranty
- Glossary
- Index
Professional Access Point
Administrator Guide
Class and Field Reference - 268
Valid values Netmask in dotted-decimal notation.
status
Purpose Controls whether this is on or off.
Valid values "up" or "down".
type
Purpose The type of the interface. Used to determine what additional fields are available. Read-only.
Valid values "service-set", "bridge", "vlan", "wds", "pptp", "pppoe".
description
Purpose A human-readable description of the interface.
Valid values an ASCII string.
mac
Purpose The MAC address of the interface.
Valid values 6 colon-separated hexadecimal digit pairs.
static-ip
Purpose The static IP address of this interface. Used when DHCP is not in use.
Valid values IP address.
static-mask
Purpose The static netamsk of this interface. Used when DHCP is not in use.
Valid values Netmask in dotted-decimal notation.
rx-bytes
Purpose Received bytes.
Valid values Integer.
rx-packets
Purpose Received packets.
Valid values Integer.
rx-errors
Purpose Received packets with errors.
Valid values Integer.