Technical data
Table Of Contents
- Professional Access Point Administrator Guide
- Contents
- About This Document
- Getting Started
- Web User Interface
- Basic Settings
- Navigating to Basic Settings
- Review / Describe the Access Point
- Provide Administrator Password and Wireless Network Name
- Set Configuration Policy for New Access Points
- Update Basic Settings
- Summary of Settings
- Basic Settings for a Standalone Access Point
- Your Network at a Glance: Understanding Indicator Icons
- Cluster
- Status
- Advanced
- Basic Settings
- Command Line Interface
- Troubleshooting
- Regulatory Information
- U.S. Robotics Corporation Two (2) Year Limited Warranty
- Glossary
- Index
Professional Access Point
Administrator Guide
Class and Field Reference - 263
type
Purpose The type of device detected.
Valid values "AP", "Ad hoc", or "Other".
privacy
Purpose Whether privacy (WEP or WPA) is enabled.
Valid values "On" or "Off".
ssid
Purpose The SSID of the AP.
Valid values String of up to 32 octets.
wpa
Purpose Whether WPA security is enabled.
Valid values "On" or "Off".
phy-type
Purpose The mode your radio was in when the AP was detected.
Valid values 4: IEEE 802.11b.
7: IEEE 802.11g.
band
Purpose The RF band the AP was detected in.
Valid values "2.4" or "5".
channel
Purpose The channel of the AP.
Valid values Positive integer.
rate
Purpose The rate of the AP.
Valid values Positive integer.
signal
Purpose The signal of the AP.
Valid values Positive integer.