Technical data
Table Of Contents
- Professional Access Point Administrator Guide
- Contents
- About This Document
- Getting Started
- Web User Interface
- Basic Settings
- Navigating to Basic Settings
- Review / Describe the Access Point
- Provide Administrator Password and Wireless Network Name
- Set Configuration Policy for New Access Points
- Update Basic Settings
- Summary of Settings
- Basic Settings for a Standalone Access Point
- Your Network at a Glance: Understanding Indicator Icons
- Cluster
- Status
- Advanced
- Basic Settings
- Command Line Interface
- Troubleshooting
- Regulatory Information
- U.S. Robotics Corporation Two (2) Year Limited Warranty
- Glossary
- Index
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 218
Security.
USR5453-AP#
get bss wlan0bssInternal detail
Field Value
---------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:0C:41:16:DF:A6
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name wlan0bssInternal
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
open-system-authentication off
shared-key-authentication on
wpa-cipher-tkip off
wpa-cipher-ccmp off
wpa-allowed off
wpa2-allowed off
rsn-preauthentication off
The following command gets details on the interface and shows the WEP Key settings, specifically.
USR5453-AP#
get interface wlan0 detail
Field Value
-------------------------------------------
type service-set
status up
description Wireless - Internal
mac 00:0C:41:16:DF:A6
ip 0.0.0.0
static-ip 0.0.0.0
static-mask
nat
rx-bytes 0
rx-packets 0
rx-errors 0
rx-drop 0
rx-fifo 0
rx-frame 0
rx-compressed 0
rx-multicast 0
tx-bytes 259662
tx-packets 722
tx-errors 0
tx-drop 0
tx-fifo 0
tx-colls 0
tx-carrier 0