User`s manual

U.S. Robotics I-modem Command Reference
Dial Security • Page 9-16
c. Check to see that you've set your Autopass password correctly by typing the follow-
ing command:
ATI10 <Enter>
Your Autopass password appears beside AUTOPASS PASSWORD.
d. Once the Autopass password is set, enable your CourierÕs Dial Security by sending
the following command:
ATS53.0=1&W <Enter>
3. If Dialback is enabled at the host I-modemÕs site, set your modem to answer the host
I-modem when it dials back.
To set your modem to answer the Dialback call, send the following command:
AT S0=1 <Enter>
4. Call the host.
5. To disable Auto Answer, type the following command after the call ends:
AT S0=0 <Enter>