User`s manual

U.S. Robotics I-modem Command Reference
Dial Security • Page 9-7
Modifying Accounts
After you have set up an account, you can modify each Þeld independently. If a Þeld is to
remain as is, just insert a comma, as shown in the following command:
AT%A1=,,,Y, <Enter>
The command above allows the guest user to supply a dialback number that is different
from the one stored in the original account record.
4. Enable Local Security.
If you do not enable Local Security, the Dial Security settings will not be protected and
other users will be able to change or erase them. Once the administrative password is
protected, when security commands are issued, the I-modem will reply [ ACCESS
DENIED ].
ATS53.2=1&W <Enter>
5. Decide which Dial Security option to use.
You can choose from two types of Dial Security: Autopass and Password Prompting.