User`s manual

U.S. Robotics I-modem Command Reference
Remote Access • Page 8-8
Note Be careful not to send ATZ or ATZ! or you will lose the connection!
Remote ConÞguration Commands
There are special commands that can be used only during a remote-access session:
%Bn Change the host I-modemÕs serial port rate.
Table 8-1. Access Privileges
Access Privileges What You Can Do
View-Only Use any of the inquiry (ATI) commands.
View and ConÞgure Use any of the I-modem commands, except those that cannot
be used while online (for example, ATD or ATA). You can also
use remote conÞguration commands.
%Bn Change the host I-modemÕs serial port rate.
%Fn Change data format (parity and data bits).
%Cn Control whether and when to apply changes to the conÞguration.
%B0 110 bps %B6 9600 bps
%B1 300 bps %B7 19200 bps