User`s manual

U.S. Robotics I-modem Command Reference
Remote Access • Page 8-5
1. Be sure that the host device has enabled remote access and is set to auto-answer
(ATS0=1). Know the password, if you will need one.
2. Call the host device (although it doesnÕt matter which device originates the call).
3. After a connection is established, do this:
a. Pause 4 seconds.
b. Type 4 tildes: ~~~~
c. Pause 4 seconds.
Note The administrator of the host device can change the remote-access charac-
ter using S-Re
gister 42, and the pause duration using S-Register 43.
4. You should see a display similar to this:
U.S. Robotics Courier I-modem with ISDN/V.34 Remote Access Session
Serial Number 000000A000000001
Password (Ctrl-C to cancel)?
There is a 3-minute time limit for entering the password.
If the number of unsuccessful log-in attempts exceeds the set limit, the host device
returns online and refuses any further log-in attempts during the remainder of the con-