User`s manual
U.S. Robotics I-modem Command Reference
Controlling Result Code Displays • Page 5-7
If the I-modem is set to X0 and the connection rate is 1200 bps-64 Kbps, result
code 14 is displayed. The other result codes indicate connection rates and require a
setting of X1 or higher.
&A2 Display modulation indicators (HST, V32, VFC, V34, or DIGITAL).
ARQ
14/CONNECT/ARQ 88/CONNECT 19200/ARQ
15/CONNECT 1200/ARQ 94/CONNECT 21600/ARQ
16/CONNECT 2400/ARQ 100/CONNECT 24000/ARQ
17/CONNECT 9600/ARQ 104/CONNECT 26400/ARQ
19/CONNECT 4800/ARQ 108/CONNECT 28800/ARQ
22/CONNECT 12000/ARQ 152/CONNECT 31200/ARQ
24/CONNECT 7200/ARQ 156/CONNECT 33600/ARQ
26/CONNECT 14400/ARQ 168/CONNECT 56000/ARQ
47/CONNECT 16800/ARQ 169/CONNECT 64000/ARQ