User`s manual

U.S. Robotics I-modem Command Reference
Controlling Result Code Displays • Page 5-1
Chapter 5
Controlling Result Code Displays
This section explains how to control the display of result codes. ÒResult codeÓ is just
another way of saying Òstatus message.Ó
Result Code Display Commands
The four commands listed below control whether result codes are displayed, and in what
format they are displayed.
Table 5-1. AT Commands That Control Result Code Diplay
Command Effect
Qn Enables or suppresses the display of result codes.
Vn Displays result codes in verbal or numeric form.
Xn Uses a speciÞed set of result codes.
&An Uses additional speciÞed sets of result codes.