User`s manual

U.S. Robotics I-modem Command Reference
Working with Memory • Page 4-17
* Detected by each I-modem from the AT preÞx of the &W com-mand that writes your defaults
to NVRAM. Set your software to the desired word length, parity, and serial port rate defaults
before sending the modem the AT É&W string.
Saving ROM Templates to NVRAM
To save one of the four templates in NVRAM and have it serve as the reset default, enter
AT&Fn&W. For example, AT&F1&W <Enter>.
Remote Digital Loopback (RDL) &T5 Deny RDL
Break handling &Y1 Clear buffer, send immediately
Stored telephone number &Z0*9=0 Blank
Externals only: V.25bis clock speed %N6 9600 bps
Call type *V=0 Auto-detect the call type
Word length* 7
Parity* 1 Even
DTE rate* (Kbps) 9600 _
Table 4-5. &F0 No Flow Control Template
NVRAM Options Setting Description