User`s manual

U.S. Robotics I-modem Command Reference
Working with Memory • Page 4-12
Transmit data hardware ßow control &H1 Hardware ßow control
Rec'd data software ßow control &I0 Disabled
Analog data compression &K1 Enabled
Normal or leased lines &L0 Normal lines
Error control/sync &M4 Normal/error control
Link rate select &N0 Variable
Rec'd data hardware ßow control &R2 Enabled
Data Set Ready &S0 Always on
Remote Digital Loopback (RDL) &T5 Deny RDL
Break handling &Y1 Clear buffer, send immediately
Stored telephone number &Z0*9=0 Blank
EXTERNALS ONLY: Synch Clock
Speed
%N6 9600 bps
Call type *V=0 Auto-detect the call type
Word length* 8
Parity* 0 None
Table 4-3. &F1 Hardware Flow Control Template
NVRAM Options Setting Description