User`s manual

U.S. Robotics I-modem Command Reference
Working with Memory • Page 4-11
For more information about hardware and software ßow control, see Chapter 10, Flow
Control.
Table 4-3. &F1 Hardware Flow Control Template
NVRAM Options Setting Description
Handshake option B0 ITU-T answer sequence
Transmitter C1 Enabled
Command mode echo E1 Enabled
Online local echo F1 Disabled
Training tone volume L2 Medium
Speaker control M1 ON during dial through con-
nect
Result codes Q0 Enabled
Verbal or numeric result codes V1 Verbal result codes
Result code subset X7 Extended. Includes all
codes except VOICE
Protocol response codes &A3 Full protocol codes
Serial port rate select &B1 Serial port rate Þxed higher
than connect rate
Guard tone &G0 U.S./Canada