User`s manual

U.S. Robotics I-modem Command Reference
Working with Memory • Page 4-5
Many of the DIP switches that were present on Courier V.34 modems are under software
control in the I-modem. These are the default settings:
I-modems always read these settings from NVRAM Þrst during power-on and reset, even
if DIP switch
1 is set to OFF (load &F0 settings).
Table 4-1. Former DIP Switches Ð Default Settings
Former
DIPSwitch
Number I-modem Default
1 &D2 DTR normal
2 V1 Verbal result codes
3 Q0 Display result codes
4 E1 Echo off-line commands
(command mode local echo)
5 S0=1 Auto answer on ring
6 &C1 Normal carrier detect (CD)
7 S14.1=1 Result codes orig. mode only
9 S14.0=1 Disconnect with +++