User`s manual

U.S. Robotics I-modem Command Reference
Working with Memory • Page 4-4
To dial the phone number you saved, type:
ATDS2 <Enter>
If the call requires a special setting, insert it in the command before the DSn com-
mand. In this example, &M0 (no error control) comes before DS2.
AT&M0DS2 <Enter>
Note The &Zn=s command functions differently when Dial Security is enabled.
(See Chapter 9, Dial Security
, for more information.)
To view the phone numbers youÕve saved, type:
ATI5 <Enter>
&Zn? Display the phone number stored in NVRAM at position n, where n = 0*9.
Former Courier DIP Switch Settings
This section is for the beneÞt of users who are familiar with U.S. Robotics Courier
modems or Total Control modem pools.