User`s manual

U.S. Robotics I-modem Command Reference

Appendix A: Alphabetic Command Summary • Page A-44

2 4 Fix the network rate at 64 Kbps (otherwise 56 Kbps).

38A

T&T 5ESS with 1 DN only: Route incoming analog

calls to the Data port (otherwise to the Analog Device

port).

4 16 Enable a 45-65 second link delay. For compliance

with Bellcore NWT 1953.

5 32 Map B1 LED = B-channel

1 and B2 LED to B-chan-

nel 2 (otherwise map B1 LED to Analog Device port

and B2 LED to Data port).

6 64 Disable all blinking patterns for B-channel LEDs.

S68 0 Bit-mapped register. (See Chapter 1, Using the AT Command Set, for

instructions about how to set bit-mapped registers.)

Bit Value Result

0 1 Do not allow analog calls over digital data connec-

tions.

1 2 Disable voice fallback in Universal Connect.

2 4 Disable TurboPPP.

3 8 Disable multilink PPP.

Table AÐ1. S-register

s: Their Functions and Default Settings