User`s manual

U.S. Robotics I-modem Command Reference
Appendix A: Alphabetic Command Summary • Page A-27
%Pn= Disable password security (n=0 or n=1) when no character follows the equal sign.
%Pn=sSet the following password (s) for viewing privileges only (n = 0), or view and
conÞguration privileges (n = 1).
%Pn? Display password n.
%S=n Access the security accounts. Does not disable security.
%T Enable the recognition of tone frequencies of analog dialing devices. %T is meant
primar-ily for use with network applications, but may also be integrated into cer-
tain software programs. For example, %T could be used in a security program to
identify incoming tone security codes.
To return the modem to Command mode
, press any key or drop the computer's or
terminal's DTR signal. The I-modem responds OK.
%N4 4800 bps %N10 19,200 bps
%N5 7200 bps