User`s manual

U.S. Robotics I-modem Command Reference
Appendix A: Alphabetic Command Summary • Page A-20
&Rn Received data (RTS) hardware ßow control.
&R0 Delay Clear to Send (CTS) response after Request to Send (RTS).
&R1 Ignore RTS. This setting is required if your computer or terminal or soft-
ware does not support RTS.
&R2 Enable hardware ßow control of received data. The I-modem sends data to
the computer only upon receipt of the RTS signal.
&N1 300 bps &N9 16800 bps
&N2 1200 bps &N10 19200 bps
&N3 2400 bps &N11 21600 bps
&N4 4800 bps &N12 24000 bps
&N5 7200 bps &N13 26400 bps
&N6 9600 bps &N14 28800 bps
&N7 12000 bps &N15 31200 bps
&N8 14400 bps &N16 33600 bps