User`s manual

U.S. Robotics I-modem Command Reference
Appendix A: Alphabetic Command Summary • Page A-11
Z Software reset. If DIP switch 1 is ON (factory setting), revert to the settings in
NVRAM
. If DIP switch 1 is OFF, reset to the &F0 conÞguration template (no ßow
control).
99/CONNECT 24000 ¥¥¥¥¥¥¥
103/CONNECT 26400 ¥¥¥¥¥¥¥
107/CONNECT 28800 ¥¥¥¥¥¥¥
151/CONNECT 31200 ¥¥¥¥¥¥¥
155/CONNECT 33600 ¥¥¥¥¥¥¥
162/CONNECT 56000 ¥¥¥¥¥¥¥
165/CONNECT 64000 ¥¥¥¥¥¥¥
Functions
Wait for 2nd Dial Tone
(W)
¥¥¥¥¥
Wait for Answer (@) ¥¥¥¥¥
Table A-1. Result Code Sets for ATXn Values
Setting
Result Codes X0 X1 X2 X3 X4 X5 X6 X7