User`s manual

U.S. Robotics I-modem Command Reference
Upgrading the I-modem’s Software • Page 17-3
¥ Over the Internet, ftp to ftp.usr.com. Log in as anonymous and then enter your Internet
e-mail address as your password. From the sys/pcb/dl05 directory, get the newest
I-modem Þle with the extension XMD.
Sending New Software to the I-modem
1. Start a communications software package, such as Quick Link II or MacComCenter.
Adjust the settings, if necessary, so you can send AT to the I-modem and get an OK
response.
Note If you are sending the Þle from a Macintosh computer, make sure you do
not transfer the Þle in MacBinary format. In MacComCenter, for example,
select Setup | File TransferÉ Under MacBinary options, select Never
MacBinary.
2. Type AT~X! <Enter>. The I-modem should respond as follows:
at~x!
SDL Xmodem file transfer - (Y)es (N)o (T)est >