User`s manual

U.S. Robotics I-modem Command Reference
Displaying Help Screens • Page 13-6
n=14 28800 bps
n=15 31200 bps
n=16 33600 bps
OK
Figure 13-2. Ampersand Commands Help Screen (AT&$)
S-Registers (S$)
When you send ATS$, the I-modem displays a screen that shows a partial summary of the
S-re
gister functions. More screens, which are activated when you press any key, show the
remaining registers. (See Figure 13-3.)
ats$
HELP, S Register Functions (CTRL-S to Stop, CTRL-C to Cancel)
S0 Ring to Answer On S40 Reserved
S1 Counts # of Rings S41 # of Allowed Login Attempts
S2 Escape Code Char S42 Remote Escape Code Char
S3 Carriage Return Char S43 Remote Escape Code Time (1/50sec)
S4 Line Feed Char S44 Leased Line Delay Timer (sec)
S5 Backspace Char S47 Reserved
S6 Wait Time/Dial Tone (sec) S51 Bit Mapped