User`s manual

U.S. Robotics I-modem Command Reference
Displaying Help Screens • Page 13-2
Basic Command Set ($)
When you send AT$, the I-modem displays a screen that shows a partial summary of the
basic command set. (See Figure 13-1.)
at$
HELP, Command Quick Reference (CTRL-S to Stop, CTRL-C to Cancel)
&$ HELP, Ampersand Commands Kn n=0 Call Duration Mode
%$ HELP, Percent Commands n=1 Real Time Clock Mode
A/ Repeat Last Command Ln n=0 Low Speaker Volume
A> Continuously Repeat Command n=1 Low Speaker Volume
AT Command Mode
Prefix n=2 Med Speaker Volume
A Answer Call n=3 Hi Speaker Volume
Bn n=0 V.32 originate mode Mn n=0 Speaker Off
n=1 HST originate mode n=1 Speaker On Until CD
Cn n=0 Transmitter Off n=2 Speaker Always On
n=1 Transmitter On n=3 Speaker Off During Dial
Dn Dial a Telephone Number On n=0 Return Online
n=0..9#*TPR,;"W@!()- n=1 Return Online & Retrain
DL Dial Last Phone Number n=2 Return Online & Speed Shift
DSn Dial Stored Phone Number P Pulse Dial
D$ HELP, Dial Commands Qn n=0 Result Codes Sent
En n=0 No Command Echo n=1 Quiet (No Result Codes)
n=1 Echo Command Chars n=2 Verbose/Quiet On Answer