User`s manual

U.S. Robotics I-modem Command Reference
Dial Security • Page 9-17
ConÞguring Dial Security Remotely
The host administrator can conÞgure the hostÕs security settings remotely.
Note At the host device, you must have previously enabled remote access and
assigned a remote-access password that allows view-and-change privileges
(see Chapter 8, Remote
Access). You may want to use your administrative
password as your remote-access password.
Dialing In From the Remote Site
1. From the remote site, connect to the host using Dial Security. Once a connection is
made, follow the instructions for beginning a remote-access session as described in
Chapter 8, Remote
Access.
2. When remote access has been granted, use the %S= command to access the Dial Secu-
rity accounts.
You can view the security account information by typing:
ATI10 <Enter>
3. Make any conÞguration changes and execute them immediately by typing:
AT%C2 <Enter>