Specifications

August 26, 2004 TechMemo 01-0011B
12 of 24
Configure the modem
8. Configure the user-defined Y0 modem template by typing “at&h0&r1&b1&n6&y0&w0”. (Use either
uppercase or lowercase letters. Do not mix both.)
9. Check the modem’s Y0 settings. Type “ati5” and press ENTER. A screen similar to the following will
appear:
10. Use an AT command to change any other values in template Y0. Remember to end the command with
&W0 so your settings are saved.
11. Review the changes you made by typing “ati5”.
12. Finally, type “aty0”. This tells the modem to use template Y0 when the modem is powered on or is reset.
Template Y0 = user-defined values.
The values in rectangles in this
screen are all correct because they
match this command:
AT&H0&R1&B1&N6&Y0&W0 (see
“Modem setup configuration string”
on page 24 for more information)