User`s guide

SPECIAL NOTES - AUSTRALIAN USERS
91
Command Restrictions
The modem commands shown below have their
default values and range limits set to meet Austel
approval requirements. These settings are different
from the ones listed in the “Technical Quick
Reference” section of the User’s Guide &
Reference found on our support Web page.
Command Description
Default Range
B Bell/ITU-T
B0
B0 only
&G Guard Tone
&G2
&G2 only
&P Pulse Dial Ratio &P0
&P0
only
S0 Auto Answer
3
0, 3-5
S6 Pre-Dial Pause 3
2-5
S7 Wait for Carrier 60
20-255
S8 Dial Pause
2
2-255
S11 Tone Dial Speed 85
70-255
S27 Bit-Mapped Register 1
0-255