User`s guide

TECHNICAL REFERENCE

Fax Commands

+FCLASS=n Sets the mode of operation

FCLASS=0 Data mode

FCLASS=1 Group 3 Facsimile Service Class 1mode

FCLASS=2.0 Group 3 Facsimile Service Class 2.0 mode

FCLASS? Displays the current FCLASS mode

(see mode descriptions above)

+FCLASS=? Displays the FCLASS mode options

(see mode descriptions above)

+FTS=n Stops the fax transmission

Then the modem waits for a specified time before OK appears on screen. The pause is set in 10

millisecond intervals. n is the number of 10 millisecond intervals that pass before OK appears.

(n=0-255)

+FRS=n Makes the modem wait for a specified length of silence before sending OK to the

screen The pause is set in10 millisecond intervals. n is the number of 10 millisecond intervals that

pass before OK appears. (n=0-255)

Note: This command terminates with OK when either the specified amount of silence is

detected or when the user types anything (which is ignored).