User`s guide

TECHNICAL REFERENCE

S27 (Continued) Bit Value Result

6 64 Disable V.42 selective reject

7 128 Software compatibility mode

This setting disables the codes and displays the 9600 code instead

The actual rate of the call can be viewed on the ATI6 screen

Used for unusual software incompatibilities

Some software may not accept 7200, 12,000, and 14,400 bps or greater

result codes

S28 0 Eliminates the V.32 answer tones for a faster connection

8 Default item, all times are in tenths of seconds

255 Disables all connections except V.32 at 9600 bps

S29 20 Sets the duration, in tenths of a second, of the V.21 answer mode fallback timer

S30 0 Reserved

S31 128 Reserved

S32 2 Bit-mapped register setup

To set the register, see the instructions for S13

Bit Value Result

0 1 V.8 Call Indicate enabled

1 2 Enables V.8 mode

2 4 Reserved

3 8 Disable V.34 modulation