User`s guide

TECHNICAL REFERENCE
68
Yn Selects power-on/reset default
configuration
Y0 Use profile 0 setting
Y1 Use profile 1 setting
Y2 Use factory configuration 0
Y3 Use factory configuration 1
Y4 Use factory configuration 2
Z Resets modem
Z0 Resets modem to profile selected
by Y command or dip 7
Z1 Resets modem to profile 0
Z2 Resets modem to profile 1
Z3 Resets modem to factory default
profile 0 (&F0)
Z4 Resets modem to factory default
profile 1 (&F1)
Z5 Resets modem to factory default
profile 2 (&F2)
Extended Data Commands
&$ Displays a list of ampersand (&)
commands
&An Enables/disables additional result code
subsets, see Xn
&A0 ARQ result codes disabled
&A1 ARQ result codes enabled
&A2 V.32 modulation indicator
added
&A3 Protocol indicators added
LAPM/MNP/NONE (error
control) and V.42 bis/MNP5 (data
compression)
&Bn Manages modem’s serial port rate
&B0 Variable, follows connection rate
&B1 Fixed serial port rate
&B2 Fixed in ARQ mode, variable in
non-ARQ mode